Nouveautés Paires Lots Bijoux Contact
 
: Pierres précieuses calibrées par taille
Calibrated size
Buyers should be aware that gemstones are often sold in calibrated sizes. This means that stones are sold in common sizes that will fit most commercial jewelry, such as rings and bracelets. However, don't be afraid of a stone with an unusual size if you are working with a jeweler on a custom piece. A jeweler can easily size any piece to match your stone.

Purpose:
Mass-produced gem settings come in standard sizes. If a gem won't fit in a standard setting, one needs to be custom made. This involves much more labor and therefore expense. Bear this in mind when buying a gem, or selecting a cut for a gem. There are circumstances where the value of a stone makes it worth cutting for maximum yield, then later paying for a custom-made setting. In other circumstances, the cost of a custom setting isn't justified by the value of the gemstone.

Sizes:
A gem does not need to be the precise size of the setting. A skilled jeweler can modify a setting to accommodate a wide variety of gem sizes. Any round gem can be put in a standard setting. With other shapes, there are various factors to be considered. As a rule, gems under one carat can be within .1 mm of the setting size. Over one carat, a .2 mm variance can usually be accommodated and sometimes more.

Weights:
The weights given are for diamonds cut to ideal proportions. Colored stones are usually cut with greater volume than diamonds; therefore, they will weigh more than the chart sizes. The density of the material will also affect the weight. For example a 6.5 mm round diamond, sapphire and opal, all cut in the same proportions will all have different weights. The diamond (with a specific gravity of 3.52,) will weigh 1 carat. A sapphire (specific gravity 4,) will weigh 1.14 carats. The opal (specific gravity 2.15) will only weigh .61 carats. There are subtle variations to this list. For example, some list a .25 carat diamond as measuring 4.1 mm. The point is not to take these figures too literally, but to use them as a starting point for estimating weights.
Calibrated Gems for Standard Jewelry Mountings / Settings
Calibrated size
Buyers should be aware that gemstones are often sold in calibrated sizes. This means that stones are sold in common sizes that will fit most commercial jewelry, such as rings and bracelets. However, don't be afraid of a stone with an unusual size if you are working with a jeweler on a custom piece. A jeweler can easily size any piece to match your stone.

Purpose:
Mass-produced gem settings come in standard sizes. If a gem won't fit in a standard setting, one needs to be custom made. This involves much more labor and therefore expense. Bear this in mind when buying a gem, or selecting a cut for a gem. There are circumstances where the value of a stone makes it worth cutting for maximum yield, then later paying for a custom-made setting. In other circumstances, the cost of a custom setting isn't justified by the value of the gemstone.

Sizes:
A gem does not need to be the precise size of the setting. A skilled jeweler can modify a setting to accommodate a wide variety of gem sizes. Any round gem can be put in a standard setting. With other shapes, there are various factors to be considered. As a rule, gems under one carat can be within .1 mm of the setting size. Over one carat, a .2 mm variance can usually be accommodated and sometimes more.

Weights:
The weights given are for diamonds cut to ideal proportions. Colored stones are usually cut with greater volume than diamonds; therefore, they will weigh more than the chart sizes. The density of the material will also affect the weight. For example a 6.5 mm round diamond, sapphire and opal, all cut in the same proportions will all have different weights. The diamond (with a specific gravity of 3.52,) will weigh 1 carat. A sapphire (specific gravity 4,) will weigh 1.14 carats. The opal (specific gravity 2.15) will only weigh .61 carats. There are subtle variations to this list. For example, some list a .25 carat diamond as measuring 4.1 mm. The point is not to take these figures too literally, but to use them as a starting point for estimating weights.
Weight Comparison Chart
  • Première publication: April-04-2007
  • Dernière mise à jour: March-17-2017
  • © 2005-2017 GemSelect.com tous droits réservés.
    Reproduction (texte ou graphique), sans le consentement écrit de GemSelect.com (SETT Company Ltd) est strictement interdite.
Support à la clientèle en parlant d'anglaise seulement

Sans frais - USA et Canada seulement:
1-800-464-1640

International:
+66-39303404

Réorganiser les articles

Économisez de l'argent
Pas de frais d'expédition pour les articles supplémentaires!
$ 6,99 Livraison dans le monde

Update Translation
 
Current Value
New Value

Creating Account...

Close window to continue

Facebook did not provide your email to login.

Please allow Facebook to provide your email or sign up an account with GemSelect.

GemSelect Gemstones
X Fermer la fenêtre
Colored Gemstones
X Fermer la fenêtre
Colored Gemstones
X Fermer la fenêtre
Colored Gemstones
Taille et poids

Gems are always measured in Millimeter (mm)

Dimensions are given as;
length x width x depth,
except for round stones which are;
diameter x depth

Select gems by size, not by weight!
Gem varieties vary in density, so carat weight is not a good indication of size

Note: 1ct = 0.2g

Size Comparison Chart